How to Setup and Use Router Table System

Router Tables

There are so many different types of router tables in the market and most of them are complete with all accessories for routing. When you buy a router table, setting it up and using it will make the difference. This is what will determine the results that you will be able to get out of your router table system. In this article we will look at some of the key issues that you should have in mind when setting up the router table.

Basics

There are a number of essential accessories that you need to be familiar with. The initial models were quite simply and did not need so much setting up. As the industry keeps progressing there have been changes in the bases and mounting plates. You should realize that there are different types of router tables to choose from. The 3 types of router tables are:

  • Bench top which sits on a work bench and put away when not in use.
  • Floor-standing has a cabinet as the workbench and requires quite some space.
  • Extension wing is easily attached to the table saw and is quite economical as far as space is concerned.

We also had fully reviewed these types of router table . You can follow this link to view more.

You should also ensure that your machine has a stable base that will not move around when making cuts. The wheels should also be able to lock in position so that it does not shift when being used. An adjustable fence and dust collection port is useful for the router table.

#Tips for Setting up Your Router Table

There are several thing that you should look out for when you are setting up the router table. In most cases, the features that a router table has, will determine the quality of cuts. Here are some of key tips to look into :

  • Switch

Switch

Auxiliary Switch

It is imperative to ensure that this feature is working as it will make it easy to switch the router on and off. This will mean that you will not be forced to reach below the table. This should be in addition to the solid base that has built-in locking casters.

  • Insert Plate

insert-plate-and-router-lift

Insert Plate With Router Lift

The router insert plate is another essential feature to look out for. When you are setting up the router table, you should pay close attention to the insert plate as it is the one that attaches to the router base.

When you are attaching it, you should ensure it sits flush to the table surface. It should be easy to attach and remove the plate so as to make the process of height adjustments easier as well as changing bits. With a router lift, the process is made so much easier.

  • Ring

Reducer-Rings

Reducer Rings With Insert Plate

A good number of insert plates are currently sold with a reducer rings. The reducer ring will help you in choosing a ring that will match with the diameter of the router.

The importance of this feature is the fact that it will reduce any chance of a chip out and ensure that the pieces being cut do not tipple down to the opening around the router bit.

  • Fence

Adjustable-Fence

Adjustable Fence

The fence of any router table is quite critical as it will determine the level accuracy that will be achieved. The fence will guide the work piece in a proper manner so that it gets to the router bit as required.

This will also enhance safety as it allows you to add bit guards, feather boards and other essential accessories to the router table. In most cases, the fence will also have the dust collection.

  • Upgrading Router Table

built-in-track

Built-in-Track

Once you have used the router table for a while, you will certainly be inclined towards making some adjustments. Some of the key areas that you can upgrade include the feather boards and the built-in-track. You could also add the miter gauge so as to get additional support to ensure that the end result is precise.

#Tips for Edge Routing Set Up

Edge routing is one of the best functions of a router table. When you understand the set up, you will be able to rout profile like coves, chamfers and round-overs. You should look at the bits so as to ensure that they have the necessary bearings as this will guide the wood pieces that need to be cut.

When you are setting up the router table, you should ensure that the fence and the bits are made to work together so as to get necessary support and guide for routing. There are a number of techniques that you can use, with some of the best ones being :

  • Safety First

featherboards

Using Featherboards

There are some professionals who have mastered the use of router tables and as such may not necessarily need featherboards. However, most wood pieces will move upwards when being routed and as such adding support will enhance the accuracy achieved. For any piece that is longer than 24” it is advisable to use featherboards. When working on short pieces, you should bring the hands close to the surface so as to add pressure and maintain a clean and accurate cut.

  • Right to Left

right-direction-when-routing

For the best results, we have proved that when you rout from right to the left direction. This might be quite tricky at first, especially if you are using a hand-held router, but eventually you get used to it.

  • Do Multiple Passes With Deep Profiles

Cutting-Deep-Profiles

Cutting Deep Profiles

If you are routing large work pieces, you should make multiple passes. This is one of the ways that will ensure that cutting deep profiles is done efficiently. You should always listen to the sound that your router makes. If it sounds as if it is straining, it may indicate that you are cutting deeper than it can handle.

*Extra Tips For Routing The Ends

There are instances when you might be forced to rout the ends of a board, especially when you need to make a joinery. With the proper use of the router table you will be able to achieve this, without much difficulty.

Miter-Gauge

Miter Gauge

All you need is to use a miter gauge in the miter track to guide your work piece so as to pass the 90 degrees angle. In order to achieve this, you should align the bearing on the router bit to the edge of the fence. This will support the piece and prevent any damage from happening on the wood piece.

In the event that you may not have a miter track, you do not need to worry about it as you can still manage to rout the ends. You will need to set the router table fence and use a backer board that is wide. The backer board will ensure that the cuts made are smooth and prevents the router bit from exiting on the ends.

 

**Extra Tips For Routing Curved Parts

Starter-Pin

Using Starter Pin

Using Starter Pin Working on a wood piece that has curved parts is quite a challenge. However, this does not mean that you cannot achieve it. There are a number of options that are available at your disposal for irregular pieces. You should start by ensuring that they are of the same size and this will allow you to rough-cut them using a band saw. At the end of it all you should trim them so as they can match the hardboard template.

In some cases, these curved parts will require profiles like cove, round over or the chamfer. The only thing that you should ensure is that your bit has a bearing which will serve as the guide for the routing process. I was previously each student who crammed rated records into my back pack without having studying the reviews. Nearly, the trainer would hands back once again the pieces of paper plus i would shove that step as very far into my binder while i could to try to never ever confront the simple truth. This has been obviously silly and didn’t help me by any means english-essay. Your professor blogs testimonials onto your university or college essays for one simple reason, so ensure that you study them and drive them into mind . Sometimes they are as common as a repeated grammatical misstep, but other times they are deep subject material difficulties. Knowing this stuff could be handy next time an essay originates approximately which enables you to stay clear of allowing the exact same goof ups two times! This will be easy to work with even without a fence in place. The only challenge with this is the fact that the bit may skip and end up damaging the wood piece.

In order to resolve this, you should ensure that you have the starter pin installed on the insert plate. This will allow you to pivot the wood piece into the bit.

Conclusion

Irrespective of your level of expertise with the router table, these few tips should be able to help you make the most of it. You can make all the necessary upgrades that you may require so as to ensure that the router table is effective and versatile in every single way. These few techniques and tips that we have shared here can work with any type of router table and generate exceptional results as far as the routing tasks are concerned. You can keep checking here for more tips in regards to routers tables.

Hello and welcome! My name is John Walker. I’m a member of www.zentiz.com. Writing blogs is one of my favorite hobbies. During my free time, I often make cute wood toys or furniture for my daughter. I prefer wood as it is easy to be shaped and safe for children. Wood router, miter saw and table saw are among my favorite tools. I have been using these tools for long time and having plenty of experience of how to buy, how to use or what tool will perfectly meet your needs. That’s why this site was born as a gateway to share these hand-on experiences with you. Thank You!

Leave a Reply

Your email address will not be published. Required fields are marked *