How to Jumpstart a Car: Know Before You Go

Do you have an idea about how to jump start a car?  Yes, it is an awkward moment when you turn the key, and the starter motor groans and fails to fire up the engine of a car.

When your car doesn’t start, mostly it happens due to a dead battery – So, if you are looking for the fastest way to get back on the road, then you can begin with jump start car. Most drivers know why their car doesn’t start and also about the reason behind this failure, and they call instantly to their roadside assistance company.

Yes, you can also jumpstart a car if you have the right equipment and a little bit knowledge about how to jumpstart a car. It is the very simple trick which helps to jump your engine and getting back on the road in no time flat. You need a set of battery jumper cables and another vehicle that is running. According to Tips4car.com, if you know about the ins-and-outs of car battery jump starter, then it is quite easy to fix this failure. Give a read to this article and know about the safe and successful jumpstart.

How to jumpstart a car.

How to Jumpstart a Car: The Right Way of Car Battery Jump Starter

Before jump start car you should consider these two things in mind:

The Right Battery Jumper Cables

There is no need bulk of equipment to jumpstart a car; you need to look for a functioning car to use for the jump-start and jumper cables. Yes, jumper cables are the essential tool to jump start car, and these cables are inexpensive and easy to store. There are various varieties of jumper cables available in markets with different lengths, usually ranging from 10 to 20 feet and these cables also known as booster cables. You can get gauge six of the jumper cable to get best results.

Safety First

It is quite important that before performing any basic maintenance on your car, you ought to consider all safety risks. Being a car owner, you are responsible for reading the manual of your car while you are establishing jumpstart a car because some vehicles need extra steps to have a successful jump.

There are plenty of ways of jump-start a car, but here you come to know about the safest way of the jump start. Get ready to know about how to jump start a car:

Park the Cars Next To Each Other

 Well – park the functioning car in front of each other, the prior recommendations is only about 18 inches apart, but both have distance and never touching each other. For automatic transmission cars, you can put the car in park; for a manual transmission, you can set the car to neutral. Before starting jump start you can set the parking brakes on both cars, so neither car moves unexpectedly.

Both Vehicles Should Be Off & Set the Parking Brakes

You should turn off both cars and remove the keys. Take booster cablesand set it down on the ground and make sure that the clamps of cables do not touch each other.

Attaching the Jumper Cables

Start by opening the hood of both cars and locate the batteries. Usually, there are two battery terminals on each battery which is covering with red or black caps, with a + or – sign on top. So, you ought to identify which is positive, and which is negative. Yes, this distinction is very important to the success of your jump start – if your car battery terminals are dirty, then take a rag or wire brush to wipe them off.

Attach The Positive Terminal

Yes, after examining the positive or negative terminals you ought to attach the red (positive) cable clamp on the other side of the jumper cables to functioning car’s positive (+) battery terminal.

Attach The Negative Terminal

After that, you can connect the black or negative cable clamp to the working battery negative (-) battery terminal.

Attach The Other Black Clamp To a Clean Nut or Bolt On The Engine Block

Walk over to the car with the dead battery and keep in mind that doesn’t connect the black or negative cable clamp to the dead battery. You ought to attach that clamp to an unpainted metal part of the car, and this will help to a safe jump.

How Long to Charge a Dead Car Battery?

Now the times come to jump-start a car. Keep reading to find out how and how long to charge your car’s dead battery.

Start The Working Vehicle:

Well, start the working vehicle and wait for a minute or so. It depends on the condition of the battery, the age of the battery, and how long since it died. You should run the car maximum for a minute or two to get the jumpstart to work.

Start The Dead Vehicle:

Now, get ready to start the dead car. If the car still doesn’t work, then you ought to charge the battery for an additional minute or two before attempting another try.

If Car Still Doesn’t Turn On:

If your car still doesn’t turn on, then you ought to slightly revving the engine of the working car while charging the dead battery, doing this may help and you will able to start the car.

Disconnect The Jumper Cables:

Once the dead car is running, first of all, disconnect the jumper cables. First, you ought to disconnect the black jumper cable, then the red ones. Be careful while disconnecting the cables and don’t let the clamps touch each other.

Take a Short Drive:

Get ready for a short drive; when you take a short drive, then it will allow the battery to build up a charge. This ride ensures you that your car doesn’t die again once you turn it off – In a short word, this short drive help to recharge the car battery very quickly.

Luckily – from the above information, you unfold both questions of how to jump start a car and how to connect jumper cables. Follow these ways and get a successful jumpstart. Good Luck!

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.